Order picking trolley KT3
The all-round talent with a whole host of accessories
- System design with individual structure
- Load capacity of up to 300 kg
- High degree of customisation possible, including for electrical peripheral devices
The KT3 order picking trolley is the basis for many picking jobs. The optional 5th castor makes it particularly agile and easy to manoeuvre. Whether handle, writing board or wire tray, wire or wooden shelves, you are always best equipped with the KT3.
The basic model
Standard equipment: Chassis made of square tubing with welded bottom tray. Side panels made from square tubing frame with wire lattice, inserted into chassis and screwed into place.
Castors: 4 Wanzl swivel castors Ø 125 mm, rubber tread. Including deflector rings made of rubber. Alternatively with swivel castor set with 2 brakes or 2 fixed castors.
Surface finish: High-gloss, galvanised, chrome-plated.
The trolley can be customised with a range of equipment. We offer a fast delivery programme with shorter delivery times for selected equipment elements.
Basic measurements
Length: 900, 1,300 or 1,700 mm
Width: 467 or 625 mm
Height: 1,630 or 1,830 mm
Castor set
[1] Castor set with 4 swivel castors (standard)
4 Wanzl swivel castors Ø 125 mm, rubber tread.
[2] Castor set with 2 brakes
4 Wanzl swivel castors 125 mm diameter, incl. 2 with brakes. Rubber tread.
[3] Castor set with 2 swivel and 2 fixed castors
4 Wanzl castors 125 mm diameter, rubber tread.
Static elements
If the trolley has a load of more than 50 kg or a ladder (accessory) is used, at least 1 static element must be fitted.
[4] Screwed-in wire shelf
The wire shelf is screwed in at the upper end between both side panels. Mesh size 100 x 30 mm.
[5] Fixed pole
The connecting tube is screwed in between the two side panels on the top end.
[6] Rear panel
The grid back panel not only prevents the goods from slipping through, but thanks to its static properties also increases the load capacity of the trolley to 300 kg. Mesh size 50 x 50 mm.
Additional accessories
[7] Attachable wire shelves
The wire shelves can be attached at heights at 50 mm intervals. Mesh size 100 x 30 mm. Including plastic elements for mounting and damping noise.
[8] Push bar
The pushing handles are made from plastic-coated steel tubing. They are available in ultramarine blue or fire red.
[9] Step
Only possible in combination with a static element! Folding metal step with three positions.
[10] Writing board
The hanging writing board is fitted with a terminal strip. The angle can be adjusted separately.
[11] 5th castor
Mechanical version. The trolley can thus be rotated 360° on the spot.
Static elements
If the trolley has a load of more than 50 kg or a ladder (accessory) is used, at least 1 static element must be fitted.
[1] Screwed-in wire shelf with 25 mm upstand on both sides
The wire shelf is screwed in at the upper end between both side panels. Mesh size 100 x 30 mm.
[2] Screwed-in wooden shelf
The wire shelf is screwed in at the upper end between both side panels.
Additional accessories
[3] Wire shelf with 25mm upstand on both sides
Hook-on attachment. Mesh size 100 x 30 mm. Including plastic elements for mounting and damping noise.
[4] Wire shelf with 100 mm upstand on both sides
Hook-on attachment. Mesh size 100 x 30 mm. Including plastic elements for mounting and damping noise. With plug-in dividers on request.
[5] Divider
For fitting onto wire shelves.
[6] Scanner rail
Made of metal. For wire shelves with or without a raised edge.
[7] Sheet metal shelf
The sheet metal shelves can be attached at heights at 50 mm intervals. Optionally with freely movable dividers.
[8] Shelf with wooden support
Hook-on attachment. Including Plastic elements for mounting and damping noise.
[9] Wire mesh door
Only available in combination with a wire mesh rear panel! 2-leaf wire mesh door with locking mechanism. Mesh size 50 x 50 mm.
[10] Writing board
The coated metal plate can be written on with a piece of chalk.
[11] Note holder
Metal plate with clamping bar for screwing on.
[12] Wire tray
Thanks to the narrow mesh size of 5 x 5 mm, your small items are safe here. Length 235 mm x width 170 mm x height 135 mm
[13] Clothes rail
Hook-on attachment. Ideal for transporting hanging goods.
[14] Antistatic strap
For reliable voltage dissipation. Fitted on chassis or on 5th castor.
[15] Lithium-ion battery 20 Ah
In combination with an inverter, our battery offers a mobile electricity supply for suitable peripheral drives such as printers, scanners or monitors, for example. Multi-shift operation is ensured by the quick-change battery pack system.
